Plug and play harness for ReFlex Plus™ for BMW B58™ engine B58B30O1.
Included:
-
ReFlex™ plug and play harness
-
This plug and play harness connects to all of the following: port injection, ethanol sensor, low pressure fuel sensor, MAP, intake CAM, and crank sensor.
-
-
CAN + power splitter
-
The CAN + power splitter connects the harness to the body domain controller in the passenger footwell behind the kick-plate.
-
-
Charge pipe extension cable
-
The charge pipe extension cable connects into the charge pipe MAP sensor to read higher boost pressures for those tuning with Bootmod3 or MHD on B58 Gen 1 and Gen 2 platforms. It does not fit the S58 G8X chassis; if tuning with Bootmod3 or MHD on the G8X Chassis (S58 engine), we recommend changing the TMAP sensor to a higher pressure 4 Bar sensor rather than trying to extend to the charge pipe.
-
-
Auxiliary cable pack
-
Four additional cables are included to simplify future expansions such as additional sensors, methanol, or NOS. These 8 ft. cables plug directly into the unused ReFlex™ harness auxiliary ports Aux Out 1/2/3 and Aux in 4 (PSI).
-
-
ReFlex Plus™ mounting bracket
-
The mounting bracket holds the ReFlex™ safely in place in the access compartment next to the engine bay on the passenger side.
-
-
Available with or without ReFlex Plus™ and Motiv™ 0-10 Bar Pressure Sensor
Compatible Car Models:
-
2018-present BMW™ 340i G20
-
2021-present BMW™ 240i G22
-
2022-present BMW™ 440i G42
-
2018-present BMW™ X3M40i G01
Reviews
There are no reviews yet.